Skip to content

Measurement preparation

Shooting jacket measurements: which brand form should you use?

Compare the purpose and instructions of Kurt Thune, Gehmann and Monard measurement resources before collecting dimensions for a shooting jacket.

Official sources checked:

Start here

Use one manufacturer’s form from start to finish. Similar field names or numbers do not establish that two forms use the same measurement path.

1. Separate size selection from a custom order

A standard-size chart helps compare nominal dimensions. A made-to-measure form asks for construction inputs and often more detail. Start with the exact model and ask the manufacturer which document applies. AimFit’s automatic comparison currently covers 42 Kurt Thune chart entries only; other brands remain manual references.

See supported charts and their limits →

2. Kurt Thune: chart and order form are different

The jacket chart provides height and several circumference and length references. Its custom form has additional landmarks, including Q-points, and tells the measurer to work over underwear and a shooting sweater, without shooting trousers. Use its diagrams to distinguish paths rather than copying a generic sleeve-length value.

Open the official Kurt Thune form ↗

3. Gehmann: keep its field definitions intact

Gehmann’s form asks for measurements over normal shooting undergarments. It specifies shooting boots, if used, for dimensions taken from the ground. Its numbered jacket fields include shoulder, arm and back-length measurements. Treat those numbers as local to this form; they are not interchangeable with Kurt Thune field numbers.

Open the official Gehmann form ↗

4. Monard: prepare on paper, then enter the form

Monard recommends printing its measurement form before entering values into its configurator. It also asks customers to recheck measurements if they are more than two months old. Follow the actual prompts for the garment you choose and ask Monard about any field you cannot reproduce confidently.

Open Monard’s measurement workflow ↗

5. Send a reproducible record

A dealer can resolve an uncertain dimension more efficiently when the setup is explicit. Keep raw observations and questions separate. Do not add fit or growth allowances unless the manufacturer instructs you to, and label any requested adjustment as a request.

  • Record brand, model, document version, date and units.
  • Record clothing layers and the person taking measurements.
  • Repeat uncertain paths using the same landmarks.
  • Ask the manufacturer to review unresolved differences before ordering.
Use the measurement preparation tool →

Sources & editorial note

This guide combines official references with AimFit’s preparation suggestions. It is not a hands-on product review or manufacturer-endorsed advice. A document’s date does not establish applicability to every current model; confirm its version, terms and requirements with the brand before ordering.

Finish your preparation

Use the exact model’s official documents and remeasure unclear or missing readings. Seven general readings are not a complete manufacturer order form. A chart comparison or 3D concept does not confirm fit, certification or an order.

Prepare a checklist without an account. It stays in your browser until you download or share it yourself. Sizing review, quotes and orders remain with your supplier.