Skip to content

Trouser measurement preparation

Shooting trousers measurements: choose the right landmarks

Prepare shooting trouser measurements with a helper: distinguish waist landmarks, body girths, inseam-to-floor and brand-specific order forms.

Prepare and download a checklist

Official sources checked:

Start here

A trouser size label, a body measurement and a finished-garment length are different things. Choose the manufacturer’s current form before measuring.

1. Start with the exact form and model

Kurt Thune’s measurement instructions and its 2022 form are separate documents; their numbering must be checked together. Sauer uses its own trouser form. A shared word such as “waist” does not prove that two brands use the same origin.

Find the manufacturer document →

2. Prepare the measuring conditions

Kurt Thune instructs the wearer to use the shooting underlayers normally worn and to record body measurements without adding garment ease. Its floor-length fields use shooting boots. Follow the chosen brand’s instructions; do not measure over rigid shooting trousers or treat these conditions as universal across every form.

3. Separate the waist landmarks

The Kurt Thune 2022 form distinguishes the waist measuring belt (WMB), natural waist, a circumference 10 cm below the waist, hip circumference and waist-to-hip distance. A specialist WMB is not simply a normal tape. If it is unavailable, mark that limitation and ask the supplier which origin to use; do not invent a WMB value.

4. Keep length endpoints explicit

The same form requests inseam to floor with boots and waist to floor with boots. These are not an inseam ending at the ankle or a measurement copied from a hanging pair of trousers. Mark both the starting landmark and endpoint in your notes. Unclear origins require a new reading with the helper, not a conversion formula.

5. Hand over the uncertainty as well as the number

Keep observed values separate from requested garment ease or alterations. If two readings disagree, preserve the issue and repeat the measurement; AimFit’s input checks are not a manufacturer tolerance or a fit assessment.

Prepare a supplier consultation →

Your preparation checklist

Ticks stay on this page and follow a same-tab language change for up to 30 minutes. Download a text checklist to take to your consultation. Nothing is uploaded or sent to a supplier.

Sources & editorial note

This guide combines official references with AimFit’s preparation suggestions. It is not a hands-on product review or manufacturer-endorsed advice. A document’s date does not establish applicability to every current model; confirm its version, terms and requirements with the brand before ordering.

Finish your preparation

Use the exact model’s official documents and remeasure unclear or missing readings. Seven general readings are not a complete manufacturer order form. A chart comparison or 3D concept does not confirm fit, certification or an order.

Prepare a checklist without an account. It stays in your browser until you download or share it yourself. Sizing review, quotes and orders remain with your supplier.